Hubba Hubba LT 3
MSR
Fits
4 lb 13 oz90 × 75 in, 42 in peak
Floor 84 × 65 in, 48 in peak, vestibules 7.7 sq ft + 7.7 sq ft. Drawn to scale from the maker's listing; the grid is 6 in.
An inch or more to every wall. Sit-up room +9.2 in.
They don't fit side by side: 3.5 in past the wall.
An inch or more to every wall. Sit-up room +9.2 in.
Pads side by side at their listed sizes, with the average man (5 ft 9 in) lying on each. "Tight" is under an inch to a wall or the sloping roof: the fabric gives, but a wet wall wets what touches it. Open it in TentCheck to try your own pads, cots and gear, or read how fits are checked.
The lightest 3-person backpacking tents where they fit with an inch to every wall.
MSR
Fits
4 lb 13 oz90 × 75 in, 42 in peak
| Roof overhead | Floor | Share |
|---|---|---|
| Anywhere | 37.9 sq ft | 100% |
| 12 in or more | 30.4 sq ft | 80% |
| 24 in or more | 21.7 sq ft | 57% |
| 36 in or more | 11.3 sq ft | 30% |
From the modeled roof, not measured. About 36 in is where an average adult sits up straight on a pad: a 35 in sitting height, plus the pad.
| Floor (listed) | 84 × 65 in, 37.9 sq ft |
|---|---|
| Peak | 48 in (4 ft) |
| Vestibules | 7.7 sq ft + 7.7 sq ft |
| Sleeps (maker) | 3 |
| Packed weight | 21.7 oz (1 lb 5.7 oz) |
| Packed volume | 5.6 L |
| Regular pads that fit | 3 with an inch to every wall |
| Sit-up room on a pad, at the peak | +12 in for 35 in sitting height |
| Pitched footprint | 96 × 108 in (8 ft × 9 ft), floor and vestibules |
| Groundsheet to cut | About 82 × 63 in |
Floor and vestibules together cover 96 × 108 in. On a square tent pad, as campgrounds list them: 8 × 8 ft: doesn't fit; 10 × 10 ft: fits; 12 × 12 ft: fits. Guylines and stakes need more room around that.
For a groundsheet, cut it a little smaller than the floor, about 2 in, so rain running off the fly doesn't collect on it and run under the tent: about 82 × 63 in.
Floor 84 × 65 in, 48 in peak, single wall on two trekking poles. Zpacks lists each vestibule 21.5 in deep but no area; 7.7 ft² is the beak as drawn from its listed dimensions.
Roof shapes are modeled from the floor, the peak and how the poles hold the walls, not measured. Treat a result within an inch or two as too close to call.