Hubba Hubba LT 3
MSR
Fits
4 lb 13 oz90 × 75 in, 42 in peak
Floor 90 × 70 in, 44 in peak, vestibules 9.4 sq ft + 9.4 sq ft. Drawn to scale from the maker's listing; the grid is 6 in.
An inch or more to every wall. Sit-up room +4.9 in.
They don't fit side by side: 1 in past the wall.
An inch or more to every wall. Sit-up room +4.9 in.
Pads side by side at their listed sizes, with the average man (5 ft 9 in) lying on each. "Tight" is under an inch to a wall or the sloping roof: the fabric gives, but a wet wall wets what touches it. Open it in TentCheck to try your own pads, cots and gear, or read how fits are checked.
The lightest 3-person backpacking tents where they fit with an inch to every wall.
MSR
Fits
4 lb 13 oz90 × 75 in, 42 in peak
| Roof overhead | Floor | Share |
|---|---|---|
| Anywhere | 43.8 sq ft | 100% |
| 12 in or more | 42.1 sq ft | 96% |
| 24 in or more | 35.8 sq ft | 82% |
| 36 in or more | 21.5 sq ft | 49% |
From the modeled roof, not measured. About 36 in is where an average adult sits up straight on a pad: a 35 in sitting height, plus the pad.
| Floor (listed) | 90 × 70 in, 43.8 sq ft |
|---|---|
| Peak | 44 in (3 ft 8 in) |
| Vestibules | 9.4 sq ft + 9.4 sq ft |
| Sleeps (maker) | 3 |
| Packed weight | 114.5 oz (7 lb 2.5 oz) |
| Packed volume | 24.9 L |
| Regular pads that fit | 3 with an inch to every wall |
| Sit-up room on a pad, at the peak | +8 in for 35 in sitting height |
| Pitched footprint | 90 × 126.5 in (7 ft 6 in × 10 ft 7 in), floor and vestibules |
| Groundsheet to cut | About 88 × 68 in |
Floor and vestibules together cover 90 × 126.5 in. On a square tent pad, as campgrounds list them: 8 × 8 ft: doesn't fit; 10 × 10 ft: doesn't fit; 12 × 12 ft: fits. Guylines and stakes need more room around that.
For a groundsheet, cut it a little smaller than the floor, about 2 in, so rain running off the fly doesn't collect on it and run under the tent: about 88 × 68 in.
Floor 90 × 70 in, 44 in peak, two 9.4 ft² vestibules. Its packaged weight and packed size include the footprint that comes with it.
Roof shapes are modeled from the floor, the peak and how the poles hold the walls, not measured. Treat a result within an inch or two as too close to call.