TentCheck

Kelty Daydreamer 6P

Floor 120 × 107 in, 77 in peak, vestibules 26.7 sq ft. Drawn to scale from the maker's listing; the grid is 6 in.

Which pads fit

6 regular padsFits, but tight

Tight, against the sloping wall. Sit-up room +15.8 in.

A queen air mattressFits

An inch or more to every wall. Sit-up room +30.5 in.

Two queen air mattressesFits, but tight

Tight, against the sloping wall. Sit-up room +26.1 in.

Two camp cotsFits

An inch or more to every wall. Sit-up room +21 in.

Pads side by side at their listed sizes, with the average man (5 ft 9 in) lying on each. "Tight" is under an inch to a wall or the sloping roof: the fabric gives, but a wet wall wets what touches it. Open it in TentCheck to try your own pads, cots and gear, or read how fits are checked.

Headroom

Roof overheadFloorShare
Anywhere89.2 sq ft100%
12 in or more88.4 sq ft99%
24 in or more84 sq ft94%
36 in or more75.9 sq ft85%

From the modeled roof, not measured. About 36 in is where an average adult sits up straight on a pad: a 35 in sitting height, plus the pad.

The numbers

Floor (listed)120 × 107 in, 89.2 sq ft
Peak77 in (6 ft 5 in)
Vestibules26.7 sq ft
Sleeps (maker)6
Packed weight316 oz (19 lb 12 oz)
Packed volume31.9 L
Regular pads that fit5 with an inch to every wall
Sit-up room on a pad, at the peak+41 in for 35 in sitting height
Standing room26.7 sq ft at 5 ft 9 in, 38.7 sq ft at 5 ft 3.5 in
Pitched footprint181.2 × 107 in (15 ft 1 in × 8 ft 11 in), floor and vestibules
Groundsheet to cutAbout 118 × 105 in

On the campsite

Floor and vestibules together cover 181.2 × 107 in. On a square tent pad, as campgrounds list them: 8 × 8 ft: doesn't fit; 10 × 10 ft: doesn't fit; 12 × 12 ft: doesn't fit. Guylines and stakes need more room around that.

For a groundsheet, cut it a little smaller than the floor, about 2 in, so rain running off the fly doesn't collect on it and run under the tent: about 118 × 105 in.

Notes

Floor 120 × 107 in, 77 in peak (standing height), one door with a 26.69 ft² vestibule.

Sources

Roof shapes are modeled from the floor, the peak and how the poles hold the walls, not measured. Treat a result within an inch or two as too close to call.