TentCheck

Gazelle Backcountry T10

Floor 193 × 94 in, 82 in peak, no vestibule. Drawn to scale from the maker's listing; the grid is 6 in.

Which pads fit

8 regular padsFits

An inch or more to every wall. Sit-up room +43.8 in.

A queen air mattressFits

An inch or more to every wall. Sit-up room +36.5 in.

Two queen air mattressesFits

An inch or more to every wall. Sit-up room +37 in.

Two camp cotsFits

An inch or more to every wall. Sit-up room +28.9 in.

Pads side by side at their listed sizes, with the average man (5 ft 9 in) lying on each. "Tight" is under an inch to a wall or the sloping roof: the fabric gives, but a wet wall wets what touches it. Open it in TentCheck to try your own pads, cots and gear, or read how fits are checked.

Headroom

Roof overheadFloorShare
Anywhere126 sq ft100%
12 in or more126 sq ft100%
24 in or more125.7 sq ft100%
36 in or more124.4 sq ft99%

From the modeled roof, not measured. About 36 in is where an average adult sits up straight on a pad: a 35 in sitting height, plus the pad.

The numbers

Floor (listed)193 × 94 in, 126 sq ft
Peak82 in (6 ft 10 in)
VestibulesNone
Sleeps (maker)8
Packed weight1536 oz (96 lb)
Regular pads that fit9 with an inch to every wall
Sit-up room on a pad, at the peak+46 in for 35 in sitting height
Standing room95.3 sq ft at 5 ft 9 in, 105.6 sq ft at 5 ft 3.5 in
Pitched footprint193 × 94 in (16 ft 1 in × 7 ft 10 in), floor and vestibules
Groundsheet to cutAbout 191 × 92 in

On the campsite

Floor and vestibules together cover 193 × 94 in. On a square tent pad, as campgrounds list them: 8 × 8 ft: doesn't fit; 10 × 10 ft: doesn't fit; 12 × 12 ft: doesn't fit. Guylines and stakes need more room around that.

For a groundsheet, cut it a little smaller than the floor, about 2 in, so rain running off the fly doesn't collect on it and run under the tent: about 191 × 92 in.

Notes

Floor 193 × 94 in, 82 in high, an all-season hub shelter with roof vents and a stove jack (sold separately), for 8 people. Its vestibule is sold separately.

Sources

Roof shapes are modeled from the floor, the peak and how the poles hold the walls, not measured. Treat a result within an inch or two as too close to call.