TentCheck

Coleman Skylodge 6-Person Instant

Floor 120 × 108 in, 74 in peak, no vestibule. Drawn to scale from the maker's listing; the grid is 6 in.

Which pads fit

6 regular padsFits, but tight

Tight, against the sloping wall. Sit-up room +18.8 in.

A queen air mattressFits

An inch or more to every wall. Sit-up room +28.2 in.

Two queen air mattressesFits, but tight

Tight, against the sloping wall. Sit-up room +25.4 in.

Two camp cotsFits

An inch or more to every wall. Sit-up room +19.8 in.

Pads side by side at their listed sizes, with the average man (5 ft 9 in) lying on each. "Tight" is under an inch to a wall or the sloping roof: the fabric gives, but a wet wall wets what touches it. Open it in TentCheck to try your own pads, cots and gear, or read how fits are checked.

Headroom

Roof overheadFloorShare
Anywhere90 sq ft100%
12 in or more89.7 sq ft100%
24 in or more86.5 sq ft96%
36 in or more80.4 sq ft89%

From the modeled roof, not measured. About 36 in is where an average adult sits up straight on a pad: a 35 in sitting height, plus the pad.

The numbers

Floor (listed)120 × 108 in, 90 sq ft
Peak74 in (6 ft 2 in)
VestibulesNone
Sleeps (maker)6
Packed weight388.8 oz (24 lb 4.8 oz)
Packed volume75.4 L
Regular pads that fit5 with an inch to every wall
Sit-up room on a pad, at the peak+38 in for 35 in sitting height
Standing room26.5 sq ft at 5 ft 9 in, 42 sq ft at 5 ft 3.5 in
Pitched footprint120 × 108 in (10 ft × 9 ft), floor and vestibules
Groundsheet to cutAbout 118 × 106 in

On the campsite

Floor and vestibules together cover 120 × 108 in. On a square tent pad, as campgrounds list them: 8 × 8 ft: doesn't fit; 10 × 10 ft: fits; 12 × 12 ft: fits. Guylines and stakes need more room around that.

For a groundsheet, cut it a little smaller than the floor, about 2 in, so rain running off the fly doesn't collect on it and run under the tent: about 118 × 106 in.

Notes

Floor 120 × 108 in (10 × 9 ft), 74 in peak, front and back doors and no vestibule. Coleman says it fits two queen-size air beds.

Sources

Roof shapes are modeled from the floor, the peak and how the poles hold the walls, not measured. Treat a result within an inch or two as too close to call.